生產樓承板的時候，廠家會把它分成幾層，一點一點的制作，這樣生產會更簡單，生產的質量和性能會更有保障，問題的發生也會減少很多。那么濟南樓承板有怎樣的分層？下面簡單總結下吧。When producing the floor bearing plate, the manufacturer will divide it into several layers and make it point by point, so that the production will be simpler, the quality and performance of the production will be more guaranteed, and the occurrence of problems will be reduced a lot. So what kind of stratification does Ji 'nan floor bearing plate have? So let's make a quick summary.

　　面層：樓承板的上面層起到裝飾、防火防潮和保護結構層的作用；

　　Surface layer: the upper layer of the floor bearing plate plays the role of decoration, fire protection and moisture-proof protection structure layer;

　　結構層：樓承板，為承重部分；

　　Structural layer: floor bearing plate, bearing part;

　　粘結層：即表層與下層之間的連接層，起支撐和承重作用；

　　Bonding layer: namely, the connection layer between the surface layer and the lower layer, which plays a supporting and bearing role;

　　填充層：用于填充混凝土的功能結構層；

　　Filling layer: functional structural layer used to fill concrete;

　　找平層：用于平整或傾斜不平整的下層的結構層，通常用砂漿施工；

　　A structural layer used for leveling or slanting an uneven underlayer, usually with mortar;

　　絕緣層和保溫層：作為提高熱工性能的結構附加層，用于防火、保溫、防水、防潮；

　　Insulation layer and insulation layer: as a structural additional layer to improve thermal performance, used for fire prevention, heat preservation, waterproof, moisture-proof;

　　防水層和防潮層：防止室內水和濕氣的滲透；

　　Waterproof layer and moisture-proof layer: to prevent the penetration of indoor water and moisture;

　　隔音層：用于隔離樓承板的沖擊聲；

　　Sound insulation layer: used to isolate the impact of the floor plate;

　　隔汽層：為防止蒸汽滲透而影響保溫功能的結構層；

　　Steam insulation layer: structural layer to prevent steam penetration and affect the thermal insulation function;

　　管線鋪設層：設備隱藏管線的結構層，一般利用填充層的空間。

　　Pipeline laying layer: the structural layer in which the device hides the pipeline, usually using the space of the fill layer.

　　濟南樓承板的分層分為十層。每一層都有自己的特殊功能，層數不同。換個角度想，注意事項和操作方法都需要相應改變，不能一模一樣。一旦造成其中一個生產層的問題，將很大地影響下一層的進度，嚴重時會中斷該層的執行。因此，明顯分層都應認真對待。

　　The floor slabs are divided into ten layers. Each layer has its own special function and the number of layers is different. From another point of view, the precautions and operation methods need to be changed accordingly, not exactly the same. Once a problem occurs in one of the production layers, it can significantly affect the progress of the next layer and, in severe cases, interrupt the execution of that layer. Therefore, any layering should be taken seriously.

　　當然，樓承板在分層時，會因為操作失誤造成一些損壞，這是在所難免的，所以大家在接觸濟南樓承板的時候，該注意的事項要注意，不該進行的事兒不要去做。更多內容就來我們網站m.liondatech.com咨詢吧！

　　Of course, the floor bearing plate in the stratification, will cause some damage because of the operation error, it is inevitable, so we in contact with ji 'nan floor bearing plate, the matters to pay attention to pay attention to, should not do things don't do. Come to our website m.liondatech.com for more information!