型鋼在鋼結構中現已非常遍及，由于高頻焊型鋼本身的特征，它在與其它構件銜接時帶有一些優勢，進程比較省時省力。下面廠家來講講濟南型鋼生產在意的尺寸偏差問題吧。

Profile steel has been widely used in steel structures. Due to the characteristics of high-frequency welding profile steel, it has some advantages when connecting with other components, and the process is relatively time-saving and labor-saving. Let's talk about the size deviation that Jinan profile steel production cares about.

任何鋼結構材料的生產都不能避免成樣尺寸偏差問題，各大廠家自然就十分重視此問題，力求尺寸偏差不斷減小，因為尺寸偏差會導致成樣鋼材的使用價值的下降，然后偏差問題多是因為控制跟工藝方面的區別而產生的，在成樣鋼材上又多表現在翼緣的厚度不均這一點上。

The production of any steel structure material can not avoid the problem of sample size deviation. All manufacturers naturally attach great importance to this problem and strive to reduce the size deviation continuously, because the size deviation will lead to the decline of the use value of the sample steel. Then, the deviation problem is mostly caused by the difference between control and process. In the sample steel, it is mainly manifested in the uneven thickness of the flange.

輥縫規格的不一致又導致成樣后的型鋼測量值跟目標值存在差異。調整輥縫的時候要補償一定的厚度，就可以通過偏移屏來補償尺寸偏差，在盡量修正誤差后就可以穩定加工了；

The inconsistency of the roll gap specifications leads to the difference between the measured value of the profiled steel and the target value. When adjusting the roll gap, it is necessary to compensate for a certain thickness, so that the size deviation can be compensated through the offset screen, and the processing can be stable after correcting the error as much as possible;

另外通過改變設定的軋制尺寸，設定一個預定量，在加工過程中軋輥本身的偏差正好彌補了這一誤差，從而達到穩定型鋼厚度尺寸穩定的效果。

In addition, by changing the set rolling size and setting a predetermined amount, the deviation of the roll itself in the processing process just makes up for this error, so as to achieve the effect of stabilizing the thickness and size of the profile steel.

在對相關尺寸調整中所進行操作的過程中，要注意對采取合適的方法，有些材料在加工過程中需要對尺寸進行特別的調整，以適應生產線的運行規律和特點。

During the operation of relevant size adjustment, attention should be paid to appropriate methods. During the processing of some materials, special size adjustment is required to adapt to the operation rules and characteristics of the production line.

值得重視的是，同其它構件一樣，不妥的操作會形成它產生失衡現象，為了避免這種情況的產生，就要找出原因并提出處理方案。

It is worth noting that, like other components, improper operation will lead to imbalance. In order to avoid this situation, it is necessary to find out the reasons and propose solutions.

型鋼生產在意的尺寸偏差問題分析就到這里了，希望能夠給您的使用帶來幫助，更多注意事項您可以來我們網站http://m.liondatech.com進行咨詢了解。

That's all for the analysis of dimensional deviation in profile steel production. I hope it can help your use. For more precautions, you can come to our website http://m.liondatech.com Consult and understand.